Strawberry clay cutter

Cutter for polymer clay or any other modeling clay.

All models have been created for ease of use, the cutting edge is bevelled for an easy cutting and clean edge. The polymer clay pieces will not be sanded or only slightly sanded. The larger edge at the base gives a better grip. Each cookie cutter measures 1.2 cm high to cut any height of clay.

To prevent your clay from sticking to the clay cutter, make sure the clay adheres to your work surface. You can also add flour to your clay.

Please note that the clay cutters are handmade and may contain small defects. These minor flaws do not affect the functionality of the product except where noted.

Each cutter is 3D printed in PLA, PLA is a bioplastic made from corn.

For maintenance, please wash them in warm soapy water, despite their resistance to heat up to 60 ° C, it is strongly discouraged to put them in the dishwasher, it could deform them.

PLA used is conform to RoHS 2011/65/EU and (EU) 2015/863 and REACH regulations, which means that it does not contain any listed toxic or dangerous substances.

However, printed parts may have microcracks and holes that are invisible to the naked eye. Bacteria have a tendency to grow in these micro-cracks, which is why it is not recommended to use the cutters for food contact.

All measures shown are in cm.