Custom mold (reserved) / Silicone mold made to order 2

Moule personnalisé (réservée) / Silicone mold made to order 2

Polyvalent silicone molds ✨

Fiche produit, réservé a : Girlysgeek

Quantité : 1 moule mat BT21
Forme : 7 têtes mascottes BTS
Dimensions : Entre 6 cm et 7 cm environ (épaisseur 1 cm)
Certains détails pourront être légèrement modifiés/adaptés afin de garantir la faisabilité du moule et un rendu propre.

🌸 Infos pratiques :.

Each mold is handmade from laser-cut acrylic, giving it a smooth and shiny finish. It's more delicate, so it needs to be handled with care to avoid visible scratches on the bottom of the mold. A construction line is visible on the edge of the model.
Each mold is handmade using a 3D print blank, which may leave fine lines on your creations. The finish is matte, but you can sand it or apply a thin layer of resin for extra shine.
Ideal for use with many materials: resin, polymer clay, wax, plaster, concrete, or low-heat metal.
Temperature-resistant up to 450°C 🔥
Custom-made with care, please allow approximately 4 weeks for complete production (this lead time may vary depending on production and outsourcing)
Designed for creative use only, not recommended for food products ⚠️

Custom order terms and conditions

Comme il s’agit de produit réalisé sur mesure, la commande ne peut pas être annulée ou remboursée une fois la production commencée.
By placing this order, you confirm the specifications you have chosen (dimensions, design, finish) and agree that this is a completely handmade product. Minor variations may occur, which is part of the charm and the artisanal process 🎨

🌸 Don't forget to take a look at the detailed description below.

🌸 Please feel free to contact me if you need any advice or further information about this product. 😊

40,00 €

Out of stock

Weight	110 g

📢 Please note:

Each mold is unique and may have slight variations or minor imperfections that do not affect its use.
The opacity of the mold makes it difficult to use with UV resin.
If you use clear resin, keep in mind that the print lines and matte finish of the mold may not give a crystal-clear result.
The creations and objects shown in the photos are not included (they are here to inspire you 📸).
All dimensions are indicated in centimeters.

🌸 Advice:

The edges can be sanded for a cleaner finish.
The use of a release agent is recommended to help with demolding and extend the life of the mold.
To remove dust, a piece of adhesive tape is sufficient. For a more complete cleaning, use warm water and mild soap, then let dry thoroughly.
Avoid direct flames (such as lighters) and solvents or aggressive products to preserve the quality of the silicone.

🌸 Feel free to follow me on Instagram @maopiika

0.0

Based on 0 reviews

5 star		0%
4 star		0%
3 star		0%
2 star		0%
1 star		0%

0 of 0 reviews

Sorry, no reviews match your current selections